Perfectone Net Ware IP 300 manual

Page 28

IP 300 User Manual

Note To modify the parameters of backup settings, please use Telnet commands.

￿local prefix: With enable or switch selected in innerline dropdown list, please fill the number switching to backup setting 1 here, such as 56.

￿nonlocal prefix: With enable or switch selected in innerline dropdown list, please fill the number switching to backup setting 2 here, such as 57.

￿answer: Enter a number from 0 through 60 to set the entries of the seconds before the phone answer the call auto or forward the calls. To disable auto answer function, please set this parameter as 0.

￿ring type: Set ring type by selecting corresponding item from drop down list.

￿￿dtmf 0-9:Set ring as ordinary rings in different frequency

￿￿not disturb: Set the phone do not ring by selecting this item.

￿￿pcmring: Set ring as music shipped from factory by selecting this item.

￿￿user define Set ring as music saved by user by selecting this item.

￿use digitmap: Enable/disable digitmap by checking/unchecking the box.

￿answer: Enter a number from 0 through 60 to set the entries of the seconds before the phone answer the call auto or forward the calls. To disable auto answer function, please set this parameter as 0.

￿fwd number: Enter receiving forwarded calls phone number into this field; If the IP phone used with modem, with modem item selected in iptype list box, and then fill ISP number into this field.

￿fwd poweroff: Forward calls if power off by checking this box. Please enter

28

Image 28
Contents Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Enter setting mode Using the Keypad to Configure the IP phoneWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings  Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant usage None Command write Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice