Perfectone Net Ware IP 300 manual Set nataddr, Set nattraversal

Page 39

IP 300 User Manual

huawei system; 14: use kaiman system; 15: use Ngtel system; 16: use

asiainfo system; 17: use Lucent system; 18: use Harbour system 19: use

IPN system; 20: use Yayng system 21: use Thinker system; 22: use

Suntek system; 23: use Sippone system;24 use Ipphonex system; 25 use FED (freeworlddialup) system; 26 use Net2phone system; 27:use stanaphone system;28: use Txtc system; 29: use Italkbb system.

set nataddr XXXXX

According to system, set IP address of proxy. With SIP protocol used and proxy stun used, set stun server IP address.

set serviceid XXXXX

Set service ID according to required by service system.

set nattraversal X

Set use proxy or not. X ranged from 0 through 29: 0: do not use proxy. When the log in server and IP phone in the same LAN, or the log in system supports the IP phone working behind the LAN; 1: Use proxy. When the login system does not support IP phone working behind the LAN, please use this value to search public IP address of the NAT device. With this item selected, please make port mapping on NAT device; 2: With Citron private protocol used, use this value to fit into the GnuGK system transferring the voice and signal by router; 3: use this value with Auvtech private system used; 4: stun. Use this value with SIP

39

Image 39

Contents Page Page Product Description Before Getting StartedSoftware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State HardwareIP 300 IP Phone supports following standard and protocol Standard and ProtocolOperating requirements Electric requirementsSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Detail description of IP 300 Telnet commands Command ? Save current settings to designated positionLoad designated settings to current position Exit with saving all configurations and restart IPWill be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet subnetmask Set pppidSet ppppin Set ipSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet pin Set nat ttlSet phonenumber Set accountRegister ttl Set signalportSet registerport Set controlportSet dtmf Set rtpportJitter sizeX Set localtypeSet iddprefix Set dialnumberNumber. set dddcode Set iddcodeSet nonlocalprefix Set dddprefixSet innerline Set localpreifxSet fwdbusy Set fwdpoweroffSet fwdnumber Set fwdalwaysSet audioframes Relevant Usage store Command load Set passwordSet upgradeaddr Command storeRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callDial a Stored Number Receiving a CallSpeed Dialing Storing a Number into Memory DialKeys Press Press Twice