Perfectone Net Ware IP 300 Standard and Protocol, Operating requirements, Electric requirements

Page 5

IP 300 User Manual

E.164 dial plan and customized dial rules

100 entries for quick dial

80 entries each for missed calls, answered calls and dialed calls

Adjustable volume for both handset and speaker

Voice prompt

Standard and Protocol

IP 300 IP Phone supports following standard and protocol:

IEEE 802.3 /802.3 u 10 Base T / 100Base TX

Major G.7XX audio codec

H.323 V4

MGCP RFC2705

SIP RFC3261

Net2phone private protocol

TCP/IP: Internet transfer and control protocol

RTP: Real-time Transport Protocol

RTCP Real-time Control Protocol

VAD/CNG save bandwidth

DHCP Dynamic Host Configuration Protocol

PPPoE Point to Point Protocol over Ethernet

DNS Domain Name Server

Telnet Internet©s remote login protocol

FTP File Transfer protocol

HTTP Hyper Text Transfer protocol

Build in H.323 proxy

Operating requirements:

Operation temperature: 0 to 50°C

Storage temperature: -10°to 60°C

Humidity: 10 to 90% no dew

Electric requirements:

Voltage: 7.5V DC

5

Image 5

Contents Page Page Product Description Before Getting StartedFunction Keys of IP 300 IP Phone Introduction Normal State FeaturesHardware SoftwareOperating requirements Standard and ProtocolElectric requirements IP 300 IP Phone supports following standard and protocolSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Load designated settings to current position Save current settings to designated positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet phonenumber Set nat ttlSet account Set pinSet registerport Set signalportSet controlport Register ttlJitter sizeX Set rtpportSet localtype Set dtmfNumber. set dddcode Set dialnumberSet iddcode Set iddprefixSet innerline Set dddprefixSet localpreifx Set nonlocalprefixSet fwdnumber Set fwdpoweroffSet fwdalways Set fwdbusySet audioframes Set upgradeaddr Set passwordCommand store Relevant Usage store Command loadFtp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callSpeed Dialing Receiving a CallStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice