Perfectone Net Ware IP 300 Save current settings to designated position, Ping other net parameter

Page 34

IP 300 User Manual

store	Save current settings to designated position
load	Load designated settings to current position
exit	Exit from the setting mode without saving the configuration
write	Exit with saving all configurations and restart IP 300
ping	Ping other net parameter
ftp	The phone connects to FTP server and then get the files

Detail description of IP 300 Telnet commands

Command ?

Syntax description: No optional parameter

Usage: Type command name and parameters following P:\> . Be used as the

keyword to supply keyword and parameters of the relevant commands.

Relevant usage: None

Detailed description:

List help of all commands

For example:

P:\>?
set
get	list settings
store x	store current to xth settings
load x	load xth settings to current
exit
write	save settings

Command get

Syntax description: No optional parameter of keywords

Usage: Display basic parameters of the IP 300 IP phone

Relevant usage: None

Detailed description:

get Display basic running parameters of the IP 300 IP phone. Input

ordinary password without debug being set as 0[disable], or input super

password with debug set as 0[disable], then following parameters of IP phone

34

Image 34

Contents Page Page Before Getting Started Product DescriptionHardware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State SoftwareElectric requirements Standard and ProtocolOperating requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Enter setting mode Using the Keypad to Configure the IP phoneWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Exit with saving all configurations and restart IP Save current settings to designated positionLoad designated settings to current position Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet ip Set pppidSet ppppin Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet account Set nat ttlSet phonenumber Set pinSet controlport Set signalportSet registerport Register ttlSet localtype Set rtpportJitter sizeX Set dtmfSet iddcode Set dialnumberNumber. set dddcode Set iddprefixSet localpreifx Set dddprefixSet innerline Set nonlocalprefixSet fwdalways Set fwdpoweroffSet fwdnumber Set fwdbusySet audioframes Command store Set passwordSet upgradeaddr Relevant Usage store Command loadRelevant usage None Command write Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperStoring a Number into Memory Dial Receiving a CallSpeed Dialing Dial a Stored NumberKeys Press Press Twice