Perfectone Net Ware IP 300 Receiving a Call, Speed Dialing, Storing a Number into Memory Dial

IP 300 User Manual

2. Receiving a Call

IP300 receives incoming calls from other IP Phones using the same service platform. The IP Phone works just like an ordinary phone for incoming calls. When it rings, just lift the handset and begin speaking.

3. Speed Dialing

This feature stores up to ten phone numbers in the IP Phone’s memory locations and retrieves them for Memory Dialing.

Storing a Number into Memory Dial:

1.	In the setting mode,	-￿￿￿￿￿￿	press the “VOL+” button four times
		￿￿￿￿￿￿￿￿
				￿￿￿￿￿￿￿)￿
	to browse the different settings until reaching “speed dial settings”			￿￿￿￿￿￿

Press “SPK” button.

2. When you see this screen:

+￿!￿￿￿,￿￿

￿￿

press “Local IP” button to

enter a word (e.g. a name) to denote this memory. Then, press “SPK”

button to input enter this screen:

￿￿! ￿￿,￿￿

￿￿

3.Again, press “Local IP” button to input the phone number.

4.Press “SPK” button to confirm and input the next number.

5.When having finished the input, press “Redial” button to return to the

	￿￿￿￿￿￿￿)￿
speed dial setting screen:	￿￿￿￿￿￿	press ”Redial” six times until
into save settings screen.
	￿￿.￿￿
	￿￿￿￿￿￿￿￿
			￿￿.￿￿
6. Press “SPK” button to input enter this screen
			/￿￿￿￿￿￿￿￿￿0

7.Press “SPK” to reboot the IP phone back to “ready for call” status.

Dial a Stored Number:

1.Lift the handset or press the SPK button to hear the dial tone.

2.Press the M1-M0buttons on the right of the keypad, followed by the “Speed Dial” button. The selected number will be dialed.

52