Perfectone Net Ware IP 300 manual

Page 20

IP 300 User Manual

Note With Net2phone selected here, please set other necessary parameters: check use service option, and then fill IP address or domain name of designated server into service addr field; then set service port as 6801; fill account and password of Net2phone card into account and pin fields.

￿use service: Enable/disable service by checking/clearing this box.

￿￿With H.323 protocol selected, service refers to the gatekeeper. To make calls through gatekeeper, please check this box; otherwise, phone can only make IP-to IP calls or calls through gateway.

￿￿With MGCP protocol selected, service refers to Call Agent. Always check this box since there is no way to make calls without a Call Agent.

￿￿With SIP protocol selected, service refers to SIP Proxy Server. To make calls through gatekeeper, please check this box; otherwise, phone can only make IP-to IP calls.

￿￿With Net2phone protocol selected, service refers to Net2phone designated server. Always check this box to use Net2phone’s service.

Note Designated Net2phone server IP address are: 216.53.3.52; 4.43.114.39; 4.43.114.38 or 05.228.245.8. Domain names are: call1.net2phone.com; call2.net2phone.com; skip1.net2phone.com; skip2.net2phone.com; skip1.f8g9h0.net or skip2.f8g9h0.net.

￿service type: This option is used to accommodate the miscellaneous requirements of the system providers. When IP phone is connected to these systems, please select the corresponding service type.

￿register ttl : With H323 or SIP protocol, IP phone will send a keep-alive registration message to H323 gatekeeper or SIP proxy server every “register ttl” seconds. The minimum value is 10, maximum value is 255. Default is 60.

￿Common: no special requirements

￿￿Mediaring: use Mediaring prepaid card

￿￿Etalk: use etalk prepaid card. When this is selected, please select

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings  Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadFtp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice
Top Page Image Contents