Perfectone Net Ware IP 300 manual Phone settings

Page 26

IP 300 User Manual

normal: Call out in normal way by selecting this item.

faststart: Call out in faststart way by selecting this item.

advanced: Call out in faststart and tunneling way by selecting this item. It is a recommended way with H323 protocol used.

dtmf: Set DTMF signal sending way by selecting control string, inband audio, signal keypad or rfc 2833 from list box.

phone settings:

Fig 3.4 Phone Setting Page

Use dialplan: Set whether use dial plan or use dial number by selecting the corresponding item in drop down list.

disable: Do not use dial plan or dial number by selecting this item.

enable: Use dial plan by selecting this item.

dialnum: Use dial number by selecting this item. With this item selected, please enter the dial prefix into dial number field.

refix: Use 179XX service by selecting this item.

Hotline: Use Hotline function by selecting this item. With this item selected, please enter the hotline number into dial number field.

Note With 179xx service used, please set as follows: fill call prefix into dial

26

Image 26

Contents Page Page Before Getting Started Product DescriptionHardware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State SoftwareElectric requirements Standard and ProtocolOperating requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Exit with saving all configurations and restart IP Save current settings to designated positionLoad designated settings to current position Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet ip Set pppidSet ppppin Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet account Set nat ttlSet phonenumber Set pinSet controlport Set signalportSet registerport Register ttlSet localtype Set rtpportJitter sizeX Set dtmfSet iddcode Set dialnumberNumber. set dddcode Set iddprefixSet localpreifx Set dddprefixSet innerline Set nonlocalprefixSet fwdalways Set fwdpoweroffSet fwdnumber Set fwdbusySet audioframes Command store Set passwordSet upgradeaddr Relevant Usage store Command loadFtp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperStoring a Number into Memory Dial Receiving a CallSpeed Dialing Dial a Stored NumberKeys Press Press Twice