Perfectone Net Ware IP 300 manual Command set Syntax description set keywords value

Page 36

IP 300 User Manual

registerport 1719	signalport 3102	controlport 3022
account hk016
phonenumber 6022	fwdpoweroff 0[disable]
fwdalways 0[disable]	fwdbusy 0[disable]	fwdnoanswer 0[disable]
ringtype 12[user define]	answer 30
password 1234
upgradeaddr [empty]
sntpip 210.59.157.10	daylight 0[disable]

timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi] P:\>

Note The “V1.38” is the version number of the firmware for IP300, it could be different from the firmware version displaying on your phone. It is subject to renewal from time to time. For the latest version, please consult your service provider.

Command set

Syntax description: set keywords value

Usage: Used to configure password and other running parameters of IP300 IP

phone.

Detailed description:

set iptype X

Set how IP phone gets relevant network parameters. X ranged from 0 through 3: 0: authorize users set IP address, subnet mask and router IP address of IP phone manually; 1: use DHCP mode. With this system, your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on. IP-300 IP phone is shipped from the factory with DHCP on. So, if your LAN or

36

Image 36

Contents Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice