Perfectone Net Ware IP 300 manual Set audioframes

Page 47

IP 300 User Manual

set audioframes X

Set audio frames in RTP package. X is Arabic numerals between 0 and 7.

set 6.3k X

With G.7231, set IP-300 IP phone to use 6.3K rate or not. X is ranged from 0 through 1: 0: use 6.3K rate; 1: use 5.3K rate.

set vad X

Enable/disable VAD. X is ranged from 0 through 1: 0: disable VAD; 1: enable VAD.

set agc X

Enable/disable AGC. X is ranged from 0 through 1: 0: disable AGC; 1: enable AGC.

set aec X

Enable/disable AEC. X is ranged from 0 through 1: 0: disable AEC; 1: disable AEC.

set handsetin X

Set initial volume of handset. X is ranged from 0 through 15.

set speakerin X

Set initial volume of microphone of the base. X is ranged from 0 through 15.

set handsetout X

Set initial volume of handout. X is ranged from 0 through 31.

47

Image 47

Contents Page Page Product Description Before Getting StartedSoftware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State HardwareIP 300 IP Phone supports following standard and protocol Standard and ProtocolOperating requirements Electric requirementsSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Detail description of IP 300 Telnet commands Command ? Save current settings to designated positionLoad designated settings to current position Exit with saving all configurations and restart IPWill be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet subnetmask Set pppidSet ppppin Set ipSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet pin Set nat ttlSet phonenumber Set accountRegister ttl Set signalportSet registerport Set controlportSet dtmf Set rtpportJitter sizeX Set localtype Set iddprefix Set dialnumber Number. set dddcode Set iddcodeSet nonlocalprefix Set dddprefixSet innerline Set localpreifxSet fwdbusy Set fwdpoweroffSet fwdnumber Set fwdalwaysSet audioframes Relevant Usage store Command load Set passwordSet upgradeaddr Command storeFtp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callDial a Stored Number Receiving a CallSpeed Dialing Storing a Number into Memory DialKeys Press Press Twice