Perfectone Net Ware IP 300 manual Audio settings

Page 29

IP 300 User Manual

receiving forwarded calls phone number into fwd number field.

fwd always: Forward all calls by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

fwd busy: Forward calls if busy by checking this box. Please enter receiving

forwarded calls phone number into fwd number field.

fwd noanswer: Forward calls without replying by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

Audio settings:

Fig 3.5 Audio Setting Page

audio type: Select the audio compression algorithm from the list box. The

options are g729 g7231 g711u g711a and auto. “auto” is suggested, since

when “auto” is selected, IP phone will negotiate with system about which algorithm to use and be able to communicate with more terminals and systems.

audio frame: Set audio frames in RTP package. With G723 audio codec used, set it as 1; with G729 audio codes used, set it as 2.

g.723.1 high rate: With g.723.1 selected in audio type dropdown list, enable/disable g.723.1 high rate by checking/ unchecking this option.

vad: Enable/disable VAD (voice activity detection) by checking/ unchecking this box.

agc: Enable/disable AGC by checking/unchecking this box.

aec: Enable/disable VEC by checking/unchecking this box.

handset in: Drag the slider to adjust the volume of handset input. Drag it to the left to reduce the volume; while drag it to the right to increase the volume.

29

Image 29

Contents Page Page Product Description Before Getting StartedFunction Keys of IP 300 IP Phone Introduction Normal State FeaturesHardware SoftwareOperating requirements Standard and ProtocolElectric requirements IP 300 IP Phone supports following standard and protocolSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Load designated settings to current position Save current settings to designated positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet phonenumber Set nat ttlSet account Set pinSet registerport Set signalportSet controlport Register ttlJitter sizeX Set rtpportSet localtype Set dtmfNumber. set dddcode Set dialnumberSet iddcode Set iddprefixSet innerline Set dddprefixSet localpreifx Set nonlocalprefixSet fwdnumber Set fwdpoweroffSet fwdalways Set fwdbusySet audioframes Set upgradeaddr Set passwordCommand store Relevant Usage store Command loadFtp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callSpeed Dialing Receiving a CallStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice