Perfectone Net Ware IP 300 Set dddprefix, Set innerline, Set localpreifx, Set nonlocalprefix

Page 45

IP 300 User Manual

set dddprefix XX

Set DDD service prefix number when set dialplan value set as 1 or 2. For example, DDD service prefix number of china is 0; DDD service prefix number of USA is 1, etc. Parameter xxx must be an Arabic numeral and no longer than 3 characters.

set innerline X

Set use multi-settings or not. X ranged from 0 through 2: 0: disable

multi-settings;1: designated system to place calls; 3: enable multi-settings.

set localpreifx X

With innerline set as 1[enable] or 2 [switch], please set the number switching to backup setting 1 here, such as 56.

set nonlocalprefix X

With innerline set as 1[enable] or 2 [switch], please set the number switching to backup setting 2 here, such as 57.

set answer X

Set the ring seconds before the phone answers the call auto or forward the calls. X is ranged from 0 through 60.

set ringtype X

Set types of ring. X is ranged from 0 tohrough 12: 0-9: ring as ordinary

rings in different frequency; 10: do not ring; 11: ring as music shipped

from factory; 12: ring as music saved by user.

set digitmap X

45

Image 45

Contents Page Page Product Description Before Getting StartedFunction Keys of IP 300 IP Phone Introduction Normal State FeaturesHardware SoftwareOperating requirements Standard and ProtocolElectric requirements IP 300 IP Phone supports following standard and protocolSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Load designated settings to current position Save current settings to designated positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet phonenumber Set nat ttlSet account Set pin Set registerport Set signalport Set controlport Register ttlJitter sizeX Set rtpportSet localtype Set dtmfNumber. set dddcode Set dialnumberSet iddcode Set iddprefixSet innerline Set dddprefixSet localpreifx Set nonlocalprefixSet fwdnumber Set fwdpoweroffSet fwdalways Set fwdbusySet audioframes Set upgradeaddr Set passwordCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callSpeed Dialing Receiving a CallStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice