Perfectone Net Ware IP 300 Set password, Set debug, Set upgradeaddr, Set ntsip, Set daylight

Page 48

IP 300 User Manual

set password XXXX

Set password of the IP-300 IP phone. XXX must be ASCII characters

and no longer than 7 characters.

set debug X

Set open debugging message output grade for special tool. X is ranged from 0 through 5: 0: close debugging output; 1: output the operation information to the window; 2: output all the bug information and data in test window; 3: save the bug information into SDRAM; 4: disable checks the mark.

set upgradeaddr XXX.XXX.XXX.XXX

Set IP address or domain name of FTP server supplying upgraded program of IP-300 IP phone.

set ntsip XXX.XXX.XXX.XXX

Set IP address of time server.

set daylight X

Set use daylight or not. X ranged from 0 through 1: 0: do not use daylight;

1: use daylight.

set timezone XX

Set time zone.

Command store

Syntax description: no keyword. Parameter ranged from 0 through 4.

Usage: Save the current settings to the designated position.

Relevant Usage: store 1

Command load

Syntax description: no keyword. Parameter ranged from 0 through 4.

48

Image 48

Contents Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice