Perfectone Net Ware IP 300 manual

Page 21

IP 300 User Manual

dialnum” from the “Use dialplan” list box and put “00” into “dial number”.

￿￿Auvtech: use Auvtech’s H.323 system. When connected with Auvtech’s system, please select “auvtech” from the “nat traversal

” list box, select “account” from the “local type” list box.

￿￿Utstarcom: Use Utstarcom system

￿￿Ringtec: Use Ringtec’s H.323 system. When this is selected, please select “dialnum” from the “Use dialplan” list box and put Ringtec account into “dial number”.

￿￿Smartcon: Use Smartcon’s H.323 system

￿￿Dda: Use Dda’s H.323 system

￿￿Vida: Use Vida’s H.323 system

￿￿Citron: Use Citron’s H.323 system

￿￿Asiasoft: Use Asiasoft’s H.323 system

￿￿Uptech: Use Uptech’s MGCP system

￿￿Zte: Use Zte’s MGCP system

￿￿Huawei: Use Huawei’s MGCP or H.323 system

￿￿Kaimen: Use Kaimen’s MGCP system

￿￿Ngtel: use Ngtel system

￿￿Voipack: Use Voipack’s MGCP system

￿￿Asiainfo: Use Asiainfo’s H.323 system

￿￿Lucent: Use Lucent’s H.323 system

￿￿Harbor: Use Harbor’s MGCP system

￿￿IPN: Use IPN’s H.323 system

￿￿Yiyang: Use Yiyang’s H.323 system

21

Image 21
Contents Page Page Product Description Before Getting StartedFunction Keys of IP 300 IP Phone Introduction Normal State FeaturesHardware SoftwareOperating requirements Standard and ProtocolElectric requirements IP 300 IP Phone supports following standard and protocolSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings  Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Load designated settings to current position Save current settings to designated positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet phonenumber Set nat ttlSet account Set pinSet registerport Set signalportSet controlport Register ttlJitter sizeX Set rtpportSet localtype Set dtmfNumber. set dddcode Set dialnumberSet iddcode Set iddprefixSet innerline Set dddprefixSet localpreifx Set nonlocalprefixSet fwdnumber Set fwdpoweroffSet fwdalways Set fwdbusySet audioframes Set upgradeaddr Set passwordCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callSpeed Dialing Receiving a CallStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice