XML services. The phone performs an HTTP GET on the URI created by your system administrator.
You can set the following parameters for object requests:
•xml application URI
•xml application title
The xml application URI is the application you are loading into the IP phone. You must get this URI from your system administrator.
The xml application title is the name of the XML application that displays on the Services menu in the IP Phone UI (as option #4).
Softkeys as Customized Flash Key
You can set a softkey to generate a flash event when it is pressed on the 480i CT or 480i CT handset. You do this by setting the softkey to "flash". The IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the call is not on hold).
Softkeys as Customized Park/ Pickup Keys
The IP phone (including the
480i CT handset) have a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways a user can configure this feature:
•Using a static configuration
•Using a programmable configuration (configure soft- keys)
Note: The IP phone accepts both meth- ods of configuration. However, to avoid redundancy, Aastra Tele- com recommends you configure either a static configuration or a programmable configuration.
The IP phones support the Park/ Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.
Reference
For more information about configuring park/pickup on the 480i CT phone, see "Park Calls/ Pick Up Parked Calls" on page 21.
Softkeys as Customized Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the softkey to "empty". The soft keys are added in order (from softkey1 to softkey20) after any
Using your 480i CT Base Station
10/IP Phone User Guide