Redial Key ( ß)
The Redial key displays a list of the last 10 calls made from the handset. Use the Ï and Âto scroll through the list.
Feature Key List ( Ï )
The 480i CT cordless handset supports a programmable feature key list for easy access to common features. The available features include line keys, intercom, directory, callers log, transfer, conference, and public/private call mode. For more information about the feature keys, see "Feature Keys on the Handset" on page 39.
Menu List ( Â )
The Menu list allows access to intercom calling, and personalization of handset including language, ring tone, vibrate, backlight and silent alert. Please refer to the section "Customizing Your 480i CT Cordless Handset" on page 36.
Multifunction Handset LED Indicator
The multifunction Handset LED provides the following user feedback:
•Flash: Message Waiting Indicator – Slow
•Flash: Alerting – Rapid
•Flash: Mute – intermittent
•Flash: Hold – Intermediate
•Solid: On an active call
Battery Charging
The handset is powered by a nickel metal hydride battery pack. To install and charge the battery:
1.Slide the cover of the battery compartment.
2.Place the battery pack in the compartment with the connector wires pointing towards the bottom of the handset.
3.Connect the battery terminal wire to the charging pins located in the compartment
4.Slide the cover of the battery compartment back onto the handset
5.Place the handset, face up, in the charging cradle. The handset should easily slide into the charging cradel. If it does not, check the battery compartment cover to ensure it is in the proper position.
To confirm that the battery is charging, check the battery icon symbol on the handset display to see if the lines inside the icon are flashing left to right.
Note: The battery must be charged for a minimum of six hours prior to initial usage of the phone.
Using the 480i CT Cordless Handset
44/IP Phone User Guide