Aastra Telecom 480I CT manual Calls from the 480i CT Base Station, Handling

Calls from the 480i CT Base Station

Park Calls/Pick Up Parked Calls

The IP phone (including the

480i CT handset) has a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways a user or adminstrator can configure this feature:

•Using a static configuration

•Using a programmable configuration

Note: The IP phone accepts both meth- ods of configuration. However, to avoid redundancy, Aastra Tele- com recommends you configure either a static configuration or a programmable configuration.

The IP phone supports the Park/ Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.

The following paragraphs describe the park and pickup methods of configuration on the IP phones.

Park/Pickup Static Configuration

You can configure a static configuration for parking and picking up a call using the Aastra Web UI at Basic Settings-> Preferences. By entering the appropriate value in the "Park Call" and "Pickup Parked Call" fields, you tell the phone where to park a live call and where to pickup the parked call.

On the IP phone UI, the static configuration method displays the following:

•When a call comes in, and you pickup the handset, the default label of "Park" displays on the Phone UI.

•After pressing the "Park" soft- key to park the call, the default label of "Pickup" displays on the phone UI.

Note: On the 480i CT handset, pressing

Ïdisplays the "Park" and "Pickup" labels.

The values you enter in the Aastra Web UI for the Park/Pickup call feature are dependant on your type of server. The following table provides the values you enter for the "Park Call" and "Pickup Parked Call" fields in the Aastra Web UI.

Handling

Park/Pickup Call Server Configuration Values

Server	Park Values*	Pickup Values*
Aasterisk	700	700
Sylantro	*98	*99
BroadWorks	*68	*88
ININ PBX	callpark	pickup

*Leave "value" fields blank to disable the park and pickup feature.

/IP Phone User Guide 21