Trilogy Touch Technology 9 manual Other Matrix Connections, Matrix Ports RJ-45, Camera Connector

Commander Installation Guide

3.4OTHER MATRIX CONNECTIONS

A number of other connections are provided on the rear of the matrix. For legacy Sub D9 matrix connectors, see section 8.4.

3.4.1MATRIX PORTS – RJ-45

Commander systems delivered from spring - 2003 onwards are fitted with RJ-45 connectors for the matrix ports. Rear connector unit part number is 500-07-50.

RJ-45 Pin	Function		Cable
1	Panel Data out +	Matrix Data In	Pair 1
2	Panel Data out -
3	Panel Data In +	Matrix Data Out	Pair 2
6	Panel Data In -
5	Panel Audio out +	Matrix Audio In	Pair 3
4	Panel Audio out -
7	Panel Audio in +	Matrix Audio Out	Pair 4
8	Panel Audio in -
shell	Cable Screen

The 500-07-50 is fitted with a Sub D25 Fixed Socket which provides the 4-wire audio signals for the 6 channels of that rear connector. These are in parallel with the existing signals on pairs 3 and 4 of the corresponding RJ-45.

Input	PIN + (HOT)	PIN - (COLD)
1	24	12
2	22	10
3	20	8
4	18	6
5	16	4
6	14	2
Output	PIN + (HOT)	PIN - (COLD)
1	25	13
2	23	11
3	21	9
4	19	7
5	17	5
6	15	3
Ground	1

3.4.2CAMERA CONNECTOR

This option provides a mixing pad for up to 6 camera inputs, and a single feed for audio connection to cameras. The connector may be identified as a D15 socket on the rear connector unit.

Matrix Sub-D15 Fixed Socket Pin (+,-)	Description
8,15	Camera 1 input +,- to matrix
7,14	Camera 2 input +,- to matrix
6,13	Camera 3 input +,- to matrix
5,12	Camera 4 input +,- to matrix
4,11	Camera 5 input +,- to matrix
3,10	Camera 6 input +,- to matrix
1	Ground
2,9	Cameras Output +,- from matrix

NOTE: Since the Camera connector unit performs a passive mix, the gain must be increased on the corresponding 500-06 matrix card. See section 3.5 of this guide.

Trilogy Communications Limited Issue 9 Page 23 of 81