Trilogy Touch Technology 9 manual Power Supplies, Matrix Download

Page 62

Commander Installation Guide

8.1.2GAIN SETTING ON 500-06-01

The gain of port 6 on the 500-06-01 matrix card is set by a jumper link on the board. Jumper J6 should be set to N for normal operation or to C to increase the gain of port 6 by +25dB. The diagram below shows the position of J6.

8.2POWER SUPPLIES

A modular assembly using Pro-Bel parts. The 6U rack is type 1178 and it will be fitted with sufficient 1150 PSU modules to supply the matrix. To allow some redundancy, this is usually based on a quantity (n+1), where n = number of frames in system. Each PSU has an independent IEC style mains inlet connector.

8.3MATRIX DOWNLOAD

A desktop PC fitted with an ISA slot type Archipel link adaptor card. See Section 8.3.2. This card is no longer supplied on new systems.

A desktop PC fitted with a CardPort ISA to PCMCIA carrier and a Sundance card as below. See Section 8.3.3.

A laptop PC fitted with a Sundance SMT104 PCMCIA style adaptor card. See Section 8.3.4.

A laptop or desktop PC fitted with the Black Box IC114A PCMCIA serial adaptor card. See Section 8.3.5. The desktop option will use the CardPort converter as in Section 8.3.3.

8.3.1COMPUTER OPERATING SYSTEMS – IMPORTANT NOTE

Microsoft Windows NT4 does not include any native support for PCMCIA cards. Many laptop computers include a third party add-on such as SystemSoft Card Wizard to add this functionality. For download operation using the Sundance or Black Box PC card, this additional software must be installed. Trilogy Communications does not supply the software but will be pleased to advise on availability and offer support for use with PathFinder.

Page 62 of 81

Issue 9

Trilogy Communications Limited

Image 62
Contents Installation Guide 50096601.doc Issue Date Reason for Change ApprovedDocument Number Errata Sheet DescriptionContents Introduction Control Panels Legacy Hardware Options Available and Module Type Numbers Commander Installation Guide Issue Rack Mounting IntroductionUnpacking System Assembly 500-08-10 Changeover Module 1 500-08 Series Changeover CardCommander Installation Guide Commander Installation Guide 4 500-25-00 E1 Network Link Card 5 500-10 Series MISC. I/O GPI Cards6 500-06 Series Matrix Cards D9 Fixed Plug Pin Function Mains Connection and Fusing1 500-15-30 Series Power Supply XLR4 Fixed Socket Pin FunctionStarting the System Commander Installation Guide Connection VIA a PC COM Port Using RS232 Connecting the Matrix PortsConnecting the PC to the Commander System Sub D 9 free female Connection VIA a 500-16-03 Download Converter BOXSub D 9 free female Sub D 9 free male Installing Pathfinder 574 not 576 for a six frame system Matrix Ports RJ-45 Camera ConnectorOther Matrix Connections Alarms RS232 configurationRS422 configuration Serial Link RS232 / RS422Miscellaneous I/O Card Connector PIN-OUT Commander D37 Fixed Plug Pin DescriptionCommander D9 Fixed Socket Pin Description Commander D25 Fixed Socket Upper Connector Pins DescriptionCommander D25 Fixed Socket Lower Connector Pins Description 5.1 500-10 Switches and Indicators Suggested external wiring of Misc I/O card output 5.3 500-25 Network Card Indicators and Switches LEDConfiguring the Gain of Camera Inputs .5.1 Link Setting on Connecting Networked Systems 1 500-26 Network Rear Connector Unit RCUEither Serial Networking Commander Installation Guide Issue Current Range Control Panel Facility Comparison Table 500-41-XX Series Desktop Panels Specification RJ-45 Function Pin 2 500-3X-5X Series Standard Control Panel Rear ViewExpansion Port RJ45 socket Matrix and Expansion RJ45 socket view from rear of panelKeypad D9 Fixed Socket -51 variant only Gpio Local logic in and out D9 Fixed SocketAudio I/O D15 Fixed Socket View of Keypad front panel4 500-3X-5X Series DIP Switch Settings OFFRear Connector Layout Matrix RJ-45 fixed socket on panel Rear Connecor Layout ConnectionsExpansion out RJ-45 fixed socket on panel Gpio Local logic in and out D9 Fixed Socket Control Panel Gpio External Circuitry Keypad D9 Fixed SocketView of Keypad as seen on front panel Rear Panel Layout Connector types500-31-60 Standard Facility 16 KEY Control Panel Headset 5 Pin XLR Fixed Socket front panelGpio Local logic in and out D9 Fixed Socket 10 500-33-00 / 500-45-00 / 500-46-00 Range Gpio Local logic in and out D9 Fixed Socket Commander Installation Guide Issue Ttprog Software 6.2.1 SET-UP Routine Starting the Programme 4.3 500-3x-3x Control Panels Connecting the Hardware4.2 500-02-1x Talkback Controller Programming with the 500-16-03 Download Converter Commander Programming Cable Way D Male Way D Female4.4 500-08-10 Changeover Card Beltpacks RM15TPD-12STelephone Interfaces Connector Detail per channelConnector Detail Trilogy 500-19-10 Telephone Interface FrameTelos ONE Alignment RT Equipment 500-22-00 ICIS-1 Isdn InterfaceRemote Ports Isdn Interface RJ45 ConnectorCom Port 1.5 RJ45500-23-00 ICIS-2 Isdn Interface D15 Fixed Plug on ICIS-2 DTEGain Setting on Matrix CardsComputer Operating Systems Important Note Power SuppliesMatrix Download Installing AN Archipel Download Card in a P.C Commander Installation Guide Black BOX IC114A Pcmcia Serial Adaptor Card Matrix Ports D9 Legacy Control Panels Legacy Control Panel Facility Comparison Table2.1 500-3x-3x Series Standard Control Panel Rear View Test Port- D9 Fixed Socket Expansion Port- D9 Fixed Socket3 500-30 Series DIP Switch Settings Expansion Out- D9 Fixed Socket Connector Pin Out Expansion In D9 Fixed Socket4 500-40-0X Series Expansion Panels Commander Installation Guide Page D9 pin RJ 45 pin Colour see above Connecting VIA Structured CablingType B max length 10 metres D9 Free Plug Function Pin 6.1 500-39-30 Connector Pin Out 6 500-39-30 / 31 1U 12 KEY Panel with Loudspeaker8 500-43-51 1U, 8 REN Level Control Panel 6.2 500-39-30 Rear View7 500-3X-5X Series Control Panels Real Time Performance Matrix Audio Specification Using 500-06-02 Matrix CardsGeneral PanelsMiscellaneous I/O Card P.CCut Switch Action No action 10.1 500-3X-5X Series Internal Panel Switch Settings10.2 500-41 Desktop Panel Internal Settings Test Function 10.3 500-31-60 Programming CUT Switch OperationHSMic LSCut MCCut Off Loop Back Test Mode Safety PrecautionsMains Connector and Plug Transportation and Storage