|
| Commander Installation Guide | |
GPIO (Local logic in and out) - D9 Fixed Socket |
| ||
Pin | Function | Notes |
|
1 | Ground |
|
|
2 | Logic Input 1 |
|
|
3 | Logic Input 2 |
|
|
4 | Logic 2 Out Common |
|
|
5 | Internal +5V (Out) | Protected with 0.5A thermal fuse & 1N4002 diode. | |
6 | Logic Output 1 |
|
|
7 | Logic 1 Out Common |
|
|
8 | Logic Output 2 |
|
|
9 | Logic Input +VCC | NB Pin 9 may be driven by external voltage (With dropper | |
|
| resistor if greater than 5V), or by internal +5V via pin 5. | |
Audio I/O – D15 Fixed Socket |
|
| |
Pin | Function |
| Notes |
1 | No connection |
|
|
2 | +12V Out |
| Fused internally 0.5A |
3 | Clean Mic Out + |
| Line level, balanced, pair with 11 – |
|
|
| o/p is affected by CUT switch |
4 | Ext CUT Input |
| Parallel function to front panel Cut |
5 | Chassis Ground |
| Switch. Ground to activate |
|
| ||
6 | No connection |
|
|
7 | External Input to LS Amp - | Line level, balanced, pair with 14 | |
8 | Matrix Audio Input to Panel / parallel output - | Line level, balanced, pair with 15 | |
9 | No connection |
|
|
10 | No connection |
|
|
11 | Clean Mic Out - |
| Line level, balanced, pair with 3 |
12 | Internal Ground |
|
|
13 | No connection |
|
|
14 | External Input to LS Amp + | Line level, balanced, pair with 7 | |
15 | Matrix Audio Input to Panel / parallel output + | Line level, balanced, pair with 8 | |
Trilogy Communications Limited | Issue 9 | Page 47 of 81 |