Trilogy Touch Technology 9 manual Beltpacks, RM15TPD-12S

Commander Installation Guide

7.OTHER EQUIPMENT

7.1BELTPACKS

Beltpacks may be connected to the Commander matrix on ports configured as 4-wire. They require an external voltage supply, either +15V or ± 15V depending on the type number. The Commander PSU (500-15-30) provides a 4 pin XLR socket with ± 15V protected by an internal self resetting fuse. See section 2.5 for connector details. The tables below show the different belt box types available.

	Type	No. of input		Fixed Connector type
		channels
		(from matrix)
410-50-02		1	XLR6 Male
410-50-03		2		Hirose 12 Way Plug
				RM15TRD-12P
410-50-12		1	XLR6 Male
410-50-13		2		Hirose 12 Way Plug
				RM15TRD-12P

Mating Connector type required

XLR6 Female

Hirose 12 Way Socket

RM15TPD-12S

XLR6 Female

Hirose 12 Way Socket RM15TPD-12S

Supply	Headset
voltage	connector
required	(socket)
+15V	B-gauge
	¼” jack
± 15V	B-gauge
	¼” jack
+15V	XLR5
	Female
± 15V	XLR5
	Female

Notes:

1.All Beltpacks have one output channel (i.e. return to the matrix).

2.The Beltpack PTT (talk) switch is normally momentary action. The -12 and -13 types may be ordered with a latching talk switch, using part codes -12-L and -13-L.

3.The -02 and -03 variants are discontinued with effect December 2008.

The following tables give individual connector pin-outs for each type.

410-50-02 / 410-50-12 Single Channel Beltpack – Matrix Connection

Pin	Function
1,2 (+,-)	Audio from box
3,4 (+,-)	Audio to box
5	0V
6	+15V

410-50-03 / 410-50-13 Two Channel Beltpack– Matrix Connection

Pin	Function
1	Chassis
2,3 (+,-)	Audio 1 to box (PTB)
4,5 (+,-)	Audio 2 to box (Prog Snd)
6,7 (+,-)	Audio from box
8	+15V
9	-15V
10	0V to box
11,12 (+,-)	N/c

410-50-12 & 410-50-13 Headset Connector (XLR5 Socket on Beltpack)

Pin	Function
1	Mic IN (Screen)
2	Mic IN
3	Headset Gnd
4	Headset Out
5	Headset Out
Trilogy Communications Limited		Issue 9	Page 55 of 81