Trilogy Touch Technology 4 500-40-0X Series Expansion Panels, Expansion Out- D9 Fixed Socket

Commander Installation Guide

8.5.4500-40-0X SERIES EXPANSION PANELS

Control Panels may be linked together to provide additional facilities at one operating position. Additional level controls (RENs) or switches may be added. Alternatively, two standard panels from the 500-30 series may be linked together and will only utilise a single matrix port.

The following detail refers to expansion panel types:

•500-40-00 8 way encoder panel

•500-40-01 12 way encoder panel

•500-40-02 15 key switch panel

•500-40-04 32 way encoder panel An installation specification is given below.

Dimensions	485mm wide x 44.5mm high x 100mm deep
	(excluding connectors) 150mm deep (maximum
	including mating connectors)
	19” x 1RU rack mounting
Mains Input	90 – 260 V ac, 50-60Hz
Current Consumption	150mA @ 90V ac, 50mA @ 250V ac.

8.5.4.1Connector Pin Out

Expansion In - D9 Fixed Socket

Pin	Function
1	Analyse Input
2	Enable Remote Boot
3	Ground
4	Transputer Link Out +
5	Transputer Link In +
6	Error signal Out
7	Reset In
8	Transputer Link Out-
9	Transputer Link In-
Test Port– D9 Fixed Socket
Pin	Function
1	Analyse Input
2	Enable Remote Boot
3	Ground
4	Transputer Link Out +
5	Transputer Link In +
6	Error signal in
7	Reset Out
8	Transputer Link Out-
9	Transputer Link In-

Expansion Out– D9 Fixed Socket

Pin Function

1Analyse Input

2Enable Remote Boot

3Ground

4Transputer Link Out +

5Transputer Link In +

6Error signal in

7Reset Out

8Transputer Link Out-

9Transputer Link In-

Trilogy Communications Limited Issue 9 Page 71 of 81