Trilogy Touch Technology 9 manual Contents Introduction

Commander Installation Guide

		CONTENTS
1.	INTRODUCTION		7
	1.1	OPTIONS AVAILABLE AND MODULE TYPE NUMBERS	7
2.	INSTALLATION		9
	2.1	INTRODUCTION	9
	2.2	UNPACKING	9
	2.3	RACK MOUNTING	9
	2.4	SYSTEM ASSEMBLY	10
	2.4.1 500-08 Series Changeover Card		11
	2.4.2 500-02 Series Talkback Controller Card		12
	2.4.3 500-01 Series TDM Controller Card		13
	2.4.4 500-25-00 E1 Network Link Card		14
	2.4.5 500-10 Series Misc. I/O (GPI) Cards		14
	2.4.6 500-06 Series Matrix Cards		15
	2.5	MAINS CONNECTION AND FUSING	16
	2.5.1 500-15-30 series power supply		16
	2.5.2 Earthing Requirements		16
	2.6	STARTING THE SYSTEM	17
3. CONNECTING TO THE MATRIX			19
	3.1	CONNECTING THE MATRIX PORTS	19
	3.2	CONNECTING THE PC TO THE COMMANDER SYSTEM	19
	3.2.1 Connection via a PC COM port using RS232		19
	3.2.2 Connection via a 500-16-03 Download Converter Box		20
	3.3	INSTALLING PATHFINDER	21
	3.4	OTHER MATRIX CONNECTIONS	23
	3.4.1 Matrix Ports – RJ-45		23
	3.4.2 Camera Connector		23
	3.4.3 Serial Link (RS232 / RS422)		24
	3.4.4 Alarms		24
	3.4.5 Miscellaneous I/O Card Connector Pin-Out		25
	3.5	CONFIGURING THE GAIN OF CAMERA INPUTS	30
	3.5.1 Link setting on 500-06-02		30
4.	NETWORKING		31
	4.1	CONNECTING NETWORKED SYSTEMS	31
	4.1.1 500-26 Network Rear Connector Unit (RCU)		31
	4.2	SERIAL NETWORKING	33

Page 4 of 81 Issue 9 Trilogy Communications Limited