Note:
LIf handset 2 (the receiver) did not prepare for copying, “Copy Failure” will be displayed on handset 1 (the sender).
LIf phonebook memory is full on handset 2 (the receiver), “Copy Incomplete” will be displayed on handset 1 (the sender).
Transferring calls between handsets, conference calls
Outside calls can be transferred between 2 handsets in the same radio cell. 2 handsets in the same radio cell can have a conference call with an outside party.
Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT} and {2} (desired handset number).
LIf there is no answer, press {INT} to return to the outside call.
2Handset 2:
Press {C} or {s} to answer the page. LHandset 2 can talk with handset 1. LThe outside call will be put on hold.
3Handset 1:
To complete the call transfer, press {ih}.
To establish a conference call, press {3}.
Transferring a call without speaking to the other handset user
1During an outside call, press {INT}, then press the desired handset number.
LThe other handset rings if it is within range of the base unit and turned on.
2Press {ih}.
LThe outside call rings at the other handset.
Note:
Lkflashes to indicate the outside call is on hold.
LIf the other handset user does not answer the call within 1 minute, the call will ring at your handset again.
50 | Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 |