Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. When in :, !, x, y, or %character entry modes, you can select which character is entered by pressing a dial key repeatedly.
LMove the joystick to move the cursor.
LPress dial keys to enter characters and numbers.
LPress {C} to erase the character or number highlighted by the cursor. Press and hold {C} to erase all characters or numbers.
LPress {*} to switch between uppercase and lowercase.
LTo enter another character located on the same dial key, push the joystick right to move the cursor to the next space, then press the appropriate dial key. (This is not necessary when entering text in LetterWise mode.)
Character entry modes
Several character entry modes are available by pressing the right soft key.
Note:
LFor character entry when writing SMS messages, see page 40.
#LetterWise character table (for English)
LetterWise is a simplified text entry system which suggests the most likely letter to follow the previously entered text. Each time you press a dial key, the most likely character is displayed. If the suggested character is incorrect, press {#} repeatedly to display the desired character. You can change the language which LetterWise uses to base its suggestions on (page 29).
:Alphabet character table
;Numeric entry table
56 | Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 |