Panasonic KX-TG1840AL operating instructions Intercom, Increasing the range of the base unit

Page 60

TG1840AL(e-e).book Page 60 Tuesday, April 11, 2006 11:02 AM

Multi-unit Operation

4Enter “335”.

5Select “Cancel Base”, then press

{>}.

6Enter “0000” (default handset PIN).

L If you changed the PIN, enter it (page 32).

7Select the base unit(s) you want to cancel, by pressing the desired base unit number.

L The selected base unit number(s) will flash.

L To cancel a selected base unit number, press the number again. The number will stop flashing.

8Press {j/OK}.

9Select “Yes”, then press {>}.

10Press {ih}.

Note:

L To register the handset to another base unit or to the same base unit again, see manual registration (page 58).

Increasing the range of the base unit

You can increase the range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 6. Consult your Panasonic dealer for details.

Important:

L Before registering the repeater to this base unit, you must turn the repeater mode on.

Turning the repeater mode on/off

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page

38).

4Select “Other Options”, then press

{>}.

5Select “Repeater Mode”, then press

{>}.

6Select “On” or “Off”, then press {>}.

7Press {ih}.

Note:

L After turning repeater mode on or off, certain icons displayed on the base unit will disappear for a moment and w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.

L While the repeater mode is turned on, audible call announcements may not be heard from the handset speaker.

Intercom

Intercom calls can be made between handsets/base unit in the same radio cell.

Between a handset and the base unit

When a handset calls the base unit

1Handset:

Press {INT} and {0}.

L The base unit will ring.

2Base unit:

Press {s} to answer.

3Handset:

When finished talking, press {ih}.

Base unit:

When finished talking, press {s}.

When the base unit calls a handset

1Base unit:

Press {x} and the desired handset number.

L The handset will ring.

60

Image 60

Contents Model No. KX-TG1840AL Introduction TrademarksFeature highlights Polyphonic ringtones Useful Information Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionBattery caution Important informationGeneral EnvironmentTG1840ALe-e.book Page 8 Tuesday, April 11, 2006 1102 AM Installation Instructions to customerService difficulties Controls and displays ControlsINT Intercom Microphone Displays Base unitPlay/Stop Handset display iconsConnections Base unit display iconsBattery installation Battery chargeIf you subscribe to an Adsl service Battery replacement Battery strength Battery iconBattery life Ni-MH batteries 700 mAh Operation Operating timeTurning the power on/off Setting the date and timePower on Power offMaking calls using the handset Redial featureOther features To erase numbers in the redial listVoice enhancer Key lockMaking calls using the base unit Button to use the recall featurePause button for PBX/long distance service users Recording a telephone conversation using the handsetAnswering calls using the handset Auto talk featureTo adjust the ringer volume when an outside call comes To redial the last number dialledAnswering calls using the base unit To adjust the ringer volumeTo change ringtones Handset phonebook Editing entries in the handset phonebook Erasing entries from the handset phonebookOne touch dial Making a call using a one touch dial key Chain dialErasing a one touch dial assignment Shared phonebook Adding entries to the shared phonebookFinding and calling a shared phonebook entry Searching by first character index searchEditing entries in the shared phonebook Erasing entries from the shared phonebookChanging a name, phone number, audible call Playing back an audible call announcementCopying phonebook entries Copying handset phonebook entries to other handsetCopying handset phonebook entries to the shared phonebook Copying one entryGuide to handset settings Handset settings Sub-menu Default setting MenuRinger setup Ringer volumeChanging ringtones Night mode Setting the start and end time for night modeTurning night mode on/off Setting the ring delay for night modeDisplay setup Selecting the standby mode displaySelecting categories to bypass night mode Changing the display languageCall options Other options Resetting the handset to its default settings Turning keytones on/offGuide to base unit settings Base unit Sub-menu Default setting Settings menuNight mode Setting pause length Call optionsChanging the recall time Storing/changing emergency numbersSetting call restriction Resetting the base unit to its default settings Changing the base unit PIN Personal Identification NumberUsing Caller ID service Category features for handset phonebookCall waiting and Caller ID compatible Caller list Audible call for shared phonebookViewing the caller list and calling back Editing a caller’s phone number before calling backVoice mail service Storing caller information into the handset phonebookUsing SMS Short Message Service Using public mailbox and private mailboxesTurning SMS on/off To access the public mailbox To access a private mailboxSending a message Writing and sending a newReceiving a message Sending a saved messageEditing and sending a saved message Erasing saved messagesReading a received message Erasing received messagesStoring the sender’s number Handset phonebookGuide to SMS settings Changing private mailbox settingsSMS settings Creating private mailboxesStoring the PBX line access number for PBX users only Available character entries for SMS Character entry modesLetterWise character table for English Following are used for both uppercase and lowercase Answering system Greeting messageUsing a prerecorded greeting message Using the handsetListening to messages Playing back the greeting messageListening to new/all messages Erasing all messagesDirect command operation using the handset Calling back using the handset Caller ID subscribers onlyKey Direct commands Using the answering system remotely Remote operationTurning remote operation on/off Voice guidanceSystem settings Guide to answeringChanging the number of rings RemotelyFor Telstra Homeline service subscribers Selecting the caller’s recording timeTurning call screening on/off Turning message alert on/off Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Cancelling a base unitSelecting a base unit Intercom Increasing the range of the base unitBetween a handset and the base unit Between handsets From a handset to the base unitFrom the base unit to a handset Transferring a call without speaking to the handset user Wall mounting Useful InformationAvailable character entries TG1840ALe-e.book Page 65 Tuesday, April 11, 2006 1102 AM Extended 2 character table O Cyrillic character table PTroubleshooting Initial settingsProblem Cause & solution Telephone Call with the base unitRedial the number manually SMS Short Message Service Answering system Specifications Index PINTG1840ALe-e.book Page 74 Tuesday, April 11, 2006 1102 AM TG1840ALe-e.book Page 75 Tuesday, April 11, 2006 1102 AM Sales Department Panasonic Australia Pty. Limited Copyright