Panasonic KX-TG1840AL operating instructions Answering system

TG1840AL(e-e).book Page 71 Tuesday, April 11, 2006 11:02 AM

	Useful Information
Problem	Cause & solution
“E0” is displayed.	L Your phone number is permanently withheld or you
	have not subscribed to the appropriate service.
	Consult your service provider.
“Q” is not displayed after you read	L When an error code is displayed, “Q” will not be
a message. An error code (“FD”,	displayed even if you have read the message.
“FE”, or “E0”) is displayed.
Answering system
Problem	Cause & solution
The other party complains that they	L The recording time is set to “Greeting Only”.
cannot leave a message.	Select “1 Minute” or “3 Minutes” (page 56).
	L Message memory is full. Erase unnecessary
	messages (page 52).
I cannot operate the answering	L Another handset or the base unit user is using the
system.	answering system, SMS features, accessing the
	caller list or changing base unit settings. Wait for the
	other user to finish.
	L A caller is leaving a message. Wait for the caller to
	finish.
	L The handset is too far from the base unit. Move
	closer.
I cannot operate the answering	L You are entering the wrong remote access code.
system remotely.	Confirm that the correct remote code is entered. If
	you forget the remote access code, store a new
	remote access code again (page 54).
	L You are pressing the dial keys too quickly. Press
	each key firmly.
	L The answering system is turned off. Turn it on (page
	55).
	L You are using a pulse telephone. Try again using a
	touch tone phone.
While recording a greeting	L A call is being received. Answer the call and try
message or listening to messages,	again later.
the unit rings and recording stops.

71