Making/Answering Calls
Note:
L A maximum of 3 parties (including 1 outside party) can join a conversation.
Call privacy
Call privacy allows you to prevent other users from joining your conversations with outside callers. You can turn the feature on for both lines by programming the base unit before the call.
To allow other users to join your conversations, leave this feature off. The default setting is “Off”.
[ Base unit
1{MENU} i{#}{1}{9}{4}
2{V}/{^}: “On” or “Off” i{SAVE}
3{■} (EXIT)
L When this feature is turned on, “PRIV.” is displayed during an outside call.
Temporarily turning call privacy on/off During an outside call, you can temporarily turn call privacy on/off.
YHandset / [ Base unit
1Press {MENU} during an outside call.
2{V}/{^}: “Privacy” i{SELECT}
3{V}/{^}: “On” or “Off” i{SELECT}
L When this feature is turned on, “PRIV.” is displayed.
Note:
LAfter you hang up the call, the feature will return to the setting programmed on page 21.
Using the other line during a call
You can use the other line in the following ways:
–When a call is being received on the other line during a conversation, an interrupt tone will be heard (page 29). You can answer the 2nd call while holding the 1st call.
–During an outside call, you can also make a call using the other line by holding the 1st call.
YHandset
Example: If you are using line 1:
1Press {HOLD} 2 times to put the 1st call (line 1) on hold.
2Press {LINE 2} to make or answer a 2nd call. L To hold the 2nd call, press {HOLD} 2 times.
3To return to the 1st call (line 1), press {LINE 1}.
[ Base unit
Example: If you are using line 1:
1Press {HOLD} to put the 1st call (line 1) on hold.
2Press {LINE 2} to make or answer a 2nd call. L To hold the 2nd call, press {HOLD}.
3To return to the 1st call (line 1), press {LINE 1}.
Note for handset and base unit:
L If you subscribe to Caller ID, the 2nd caller’s information is displayed when a call is being received on the other line (page 34).
For assistance, please visit http://www.panasonic.com/help | 21 |