Useful Information
Programmable settings
Problem | Cause/solution |
The display is in a language I | L Change the display language (page 16). |
cannot read. |
|
While programming, the unit starts | L A call is being received. Answer the call and start again after |
to ring. | hanging up. |
I cannot register a handset to a | L The maximum number of handsets (6) is already registered to |
base unit. | the base unit. Cancel unused handset registrations from the |
| base unit (page 33). |
| L Place the handset and the base unit away from other electrical |
| appliances. |
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
The handset beeps and/or 3 | L Battery charge is low. Fully charge the batteries (page 12). |
flashes. |
|
I fully charged the batteries, but | L Clean the charge contacts and charge again (page 12). |
3still flashes or 4is | L It is time to replace the batteries (page 12). |
displayed. |
|
I fully charged the batteries, but | L Clean the battery ends (S, T) and the charge contacts with a |
the operating time seems to be | dry cloth and charge again. |
shorter. |
|
|
|
Making/answering calls, intercom |
|
|
|
Problem | Cause/solution |
w is flashing. | L The handset is too far from the base unit. Move closer. |
| L The base unit’s AC adaptor is not properly connected. |
| Reconnect AC adaptor to the base unit. |
| L You are using the handset or base unit in an area with high |
| electrical interference. |
| handset away from sources of interference. |
| L The handset is not registered to the base unit. Register it (page |
| 33). |
Noise is heard, sound cuts in and | L You are using the handset or base unit in an area with high |
out. | electrical interference. |
| handset away from sources of interference. |
| L If you are using the handset and base unit near a cellular |
| phone, move the cellular phone at least 0.6 m (2 feet) away |
| from them to prevent electrical interference. |
| L Move closer to the base unit. |
| L If you use a DSL/ADSL service, we recommend connecting a |
| DSL/ADSL filter between the base unit and the telephone line |
| jack. Contact your DSL/ADSL provider for details. |
The handset and/or base unit | L The ringer volume is turned off. Adjust the ringer volume (page |
does not ring. | 19). |
| L Night mode is turned on. Turn it off (page 32). |
54 | For assistance, please visit http://www.panasonic.com/help |