Phonebook
Editing entries
YHandset / [ Base unit
1Find the desired entry (page 23). i{MENU}
2{V}/{^}: “Edit” i{SELECT}
3Edit the name if necessary (16 characters max.; page 22). i{OK}
4Edit the phone number if necessary (24 digits max.). i{OK}
5{V}/{^}: Select the desired group (page 22). i{SELECT} 2 times
6Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Erasing entries
YHandset / [ Base unit
Erasing an entry
1Find the desired entry (page 23). i{MENU}
2{V}/{^}: “Erase” i{SELECT}
3{V}/{^}: “Yes” i{SELECT}
4Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Erasing all entries
1Proceed with the operation for your unit. Handset: {MENU} i{#}{2}{8}{0} Base unit: {C}
2{MENU}
3{V}/{^}: “Erase all” i{SELECT}
4{V}/{^}: “Yes” i{SELECT}
5{V}/{^}: “Yes” i{SELECT}
6Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Chain dial
This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have
stored in the phonebook, without having to dial manually.
YHandset / [ Base unit
1Proceed with the operation for your unit. During an outside call:
Handset: {MENU} i
{V}/{^}: “Phonebook” i{SELECT}
Base unit: {C}
2{V}/{^}: Select the desired entry.
3Press {CALL} to dial the number.
Note:
L When a Bluetooth headset is registered to the base unit (page 48), {W} is displayed instead of {C} on the base unit’s left soft key in step 1. To enter the chain dial feature on the base unit:
During an outside call, press {MENU}. i {V}/{^}: “Phonebook” i{SELECT}
L When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press {PAUSE} to add pauses after the number and PIN as necessary (page 18).
L If you have rotary/pulse service, you need to press {*} before pressing {MENU} on the handset or {C} on the base unit in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding {*} to the beginning of phone numbers you wish to chain dial (page 22).
Copying phonebook entries
You can copy phonebook entries from the base unit to a handset, and vice versa.
The unit can receive entries until the phonebook memory is full (page 22).
Important:
LGroups (including their names and ringer tones) are not copied.
L You cannot make phonebook copy between handsets directly. However it is possible by first copying a handset’s phonebook entries to the base unit, then copying the base unit’s phonebook entries to another handset.
24 | For assistance, please visit http://www.panasonic.com/help |