Caller ID Service
Note:
L In step 2;
–cand dindicate which line the caller information was received from.
–If the item has already been viewed or answered, “Q” is displayed, even if it was viewed or answered using another unit.
–if an arrow (>) is displayed after the number, the whole phone number is not shown. Proceed with the operation for your unit.
Handset:
Press {>} to see the remaining numbers. To return to the previous display, press {<}.
Base unit:
Press {8} to see the remaining numbers. To return to the previous display, press {7}.
LIn step 3, the unit automatically uses the line you set in line selection mode (page 17) to call back. When the line selection mode is set to “Auto”, the indicated line (cor d) is used for the call. If the indicated line is already being used or you want to select the other line:
Handset: Press {CALL}, then press {LINE 1} or {LINE 2}.
Base unit: Press {LINE 1} or {LINE 2}.
Editing a caller’s phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
YHandset / [ Base unit
1Proceed with the operation for your unit. Handset: {MENU} i{V}/{^}: “View Caller ID” i{SELECT}
Base unit: {CID}
2{V}/{^}: Select the desired entry.
3Proceed with the operation for your unit. Handset: {CALL}
Base unit: {EDIT}
4Press {EDIT} repeatedly until the phone number is shown in the desired format.
1Local phone number
Example:
321-5555
2Area code – Local phone number
Example:
31 – Area code – Local phone number
Example:
5Proceed with the operation for your unit. Handset: {C}
Base unit: {SP-PHONE}
L If the indicated line is already being used or you want to select the other line: Handset: Press {LINE 1} or {LINE 2}. Base unit: Press {LINE 1} or {LINE 2}.
Caller ID number auto edit feature
Once you call back an edited number, the unit remembers the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information is customized by the unit as follows:
–When the call is being received, the Caller ID number is displayed in the same Format as the Edited Number.
–After the call is ended, the phone number of the caller, when reviewed from the Caller list, is displayed in the same Format as the Edited Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Turning Caller ID auto edit on/off
YHandset / [ Base unit
1{MENU} i{#}{2}{1}{4}
For assistance, please visit http://www.panasonic.com/help | 35 |