Preparation
L If you want to use the handset immediately, charge the batteries for at least 15 minutes.
L Clean the charge contacts of the handset and charger with a soft and dry cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.
Battery level
Battery icon | Battery level |
1High
2Medium
3Low
L When flashing: Needs to be charged.
4Empty
Note:
L The batteries need to be charged if the handset beeps while you are engaged in a call or operating the answering system remotely.
Panasonic
Operation | Operating time |
In continuous use | 12 hours max. |
Not in use (standby) | 6 days max. |
Note:
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries.
LThe battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and let it charge for at least 7 hours.
Setting up the unit before use
Display language
You can select either “English” or “Español” as the display language. The default setting is “English”.
:Base unit / YHandset
1{MENU} i{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press the middle soft key to save.
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Voice guidance language
You can select either “English” or “Español” as the voice guidance language of the answering system. The default setting is “English”.
Program this setting using either the base unit or one of the handsets.
:Base unit / YHandset
1{MENU} i{#}{1}{1}{2}
2{V}/{^}: Select the desired setting.
3{SAVE}
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Program this setting using either the base unit or one of the handsets.
:Base unit / YHandset
1{MENU} i{#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
3{SAVE}
16 | For assistance, please visit http://www.panasonic.com/help |