:Base unit / YHandset
1Proceed with the operation for your unit. During an outside call:
Base unit: {C}
Handset: {MENU} i{V}/{^}: “Phonebook” i{SELECT}
2{V}/{^}: Select the desired entry.
3Press {CALL} to dial the number.
Note:
L When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press {PAUSE} to add pauses after the number and PIN as necessary (page 18).
L If you have rotary/pulse service, you need to press {*} before pressing {C} on the base unit or {MENU} on the handset in step 1 to change the dialing mode temporarily to tone.
Copying phonebook entries
You can copy phonebook entries from the base unit to a handset or vice versa.
Important:
L Group ringer tones are not copied.
L You cannot copy the phonebook entries between handsets.
Copying an entry
:Base unit
1{C}
2{V}/{^}: Select the desired entry. i{MENU}
3{V}/{^}: “Copy” i{SELECT}
4{V}/{^}: Enter the handset number to copy to. L When an entry has been copied,
“Completed” is displayed.
L To continue copying another entry: {V}/{^}: “Yes” i{SELECT} iFind the desired entry (page 23). i{SEND}
5{■} (EXIT)
YHandset
1{MENU} i{#}{2}{8}{0}
2{V}/{^}: Select the desired entry. i{MENU}
3{V}/{^}: “Copy to base” i{SELECT} L When an entry has been copied,
“Completed” is displayed.
L To continue copying another entry: {V}/{^}: “Yes” i{SELECT} iFind the desired entry (page 23). i{SEND}
4{OFF}
Copying all entries
:Base unit
1{C} i{MENU}
2{V}/{^}: “Copy all” i{SELECT}
3{V}/{^}: Enter the handset number to copy to. L When all entries have been copied,
“Completed” is displayed.
4{■} (EXIT)
YHandset
1{MENU} i{#}{2}{8}{0} i{MENU}
2{V}/{^}: “Copy all to base” i
{SELECT}
L When all entries have been copied, “Completed” is displayed.
3{OFF}
24 | For assistance, please visit http://www.panasonic.com/help |