Panasonic KX-TS620W To check the recorded greeting message, Pre-recorded greeting message

Preparing the Answering System

Greeting message sample

“Hello, this is (your name and/or number). Sorry I cannot take your call. Please leave a message after the beep. Thank you.”

•If the unit starts to ring while recording a greeting message, press {SP-PHONE/ HEADSET} or lift the handset off the unit to answer the call. The recording will stop. Start again from the beginning after hanging up.

To check the recorded greeting message

Press {GREETING CHECK}.

• The greeting message will be played.

To erase the recorded greeting message

Press {GREETING CHECK}, and then press {ERASE} while the message is being played.

• The unit will answer a call with a pre-recorded greeting.

Pre-recorded greeting message

If you do not record a greeting message (p. 16), one of two messages will be played when a call is received, depending on the caller’s recording time (p. 20).

To check the pre-recorded greeting, press {GREETING CHECK}. A pre-recorded greeting will be played as follows:

∫When the recording time is set to “1 minute”, “2 minutes” or “3 minutes”:

“Hello, we are not available now. Please leave your name and phone number after the beep. We will return your call.”

∫When the recording time is set to “Greeting only”:

“Hello, we are not available now. Please call again. Thank you for your call.”

Flash Memory Message Backup

Messages are stored indefinitely on a “flash memory” IC chip and will not be affected by power failures. All messages are saved until you erase them.

For assistance, please visit http://www.panasonic.com/phonehelp

17