Panasonic KX-TS620W Calling Back from the Caller List, Editing the Caller’s Phone Number

Caller ID Service

Calling Back from the Caller List

1	Press {4} or {3} to enter the
	Caller List.
2	Scroll to the desired caller by
	pressing {4} or {3}.
	• To exit the Caller List, press {EXIT}
	or wait for 60 seconds.
3	Lift the handset or press
	{SP-PHONE/HEADSET}.

4	Press {FUNCTION/EDIT}.
	repeatedly until the number is

shown in the desired format.

• Each time you press {FUNCTION/ EDIT}, the number is rearranged into one of 3 patterns.

aPhone no.

bArea code — Phone no.

c1— Area code — Phone no.

•The order of which pattern a — c are displayed depends on how the telephone number is displayed in step 2.

12:34PM NOV. 25

123456789

• The displayed phone number is

dialed automatically.

• After a few seconds, the display will

show the length of the call.

• In some cases, you may have to edit the

number before dialing (see below).

• If a phone number is not displayed in the

caller information, you cannot call back

a

b

c

444-7777

￿￿[OK]=Next

{FUNCTION/EDIT}

111-444-7777

￿￿ [OK]=Next {FUNCTION/EDIT}

1-111-444-7777

that caller.

Editing the Caller’s Phone Number

You can edit a phone number in the Caller List by removing its area code and/or the long distance code “1”.

Once you call back and edited number, this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call (Caller ID Number Auto Edit, page 14).

1	Press {4} or {3} to enter the
2	Caller List.
	Scroll to the desired caller by
	pressing {4} or {3}.
3	Press {FUNCTION/EDIT}.

	￿￿	[OK]=Next
		{FUNCTION/EDIT}
5	After editing, you can continue
	with calling back or storing

procedures.

To call back, lift the handset or press {SP-PHONE/HEADSET}. To store the number in the Phonebook memory, follow steps 4 to 5 on page 28 to complete the operation.

To store the number in the Direct Dial memory, follow steps 4 to 6 on page 29 to complete the operation.

•To exit the Caller List during editing, press {EXIT} or wait for 60 seconds.

•The number edited in step 3 will not be maintained in the Caller List.

For assistance, please visit http://www.panasonic.com/phonehelp

27