Uniden EXP1240 manual Add Extension screen

Page 25

EXP1240 System Installation Guide

Revision 06

Figure 17: Add Extension screen

Extension

Enter the handset phone number or SIP username as configured

on the SIP server or VoIP PBX.

 

 

 

 

Authentication User

Enter the name and password you use to register with the

Name and Password

selected SIP server.

 

 

 

Display Name

Enter the name of this extension (up to 10 characters). This

name is used for reference on the web interface.

 

 

 

 

Mailbox Name

Enter the name of the voice mailbox this extension should use.

 

 

 

Server

Select the SIP server this extension is programmed on.

 

 

 

 

Forwarding

Forward all calls: Enter the number the system should forward

calls to. Select Enable to turn call forwarding on or Disable to

Unconditional Number

leave it off.

 

 

 

 

Forward on no answer: Enter the number the system should

Forwarding No Answer

forward calls to when this extension does not answer, then

enter the number of seconds you want the system to wait in the

Number

field to the right. Select Enable to turn call forwarding on or

 

 

Disable to leave it off.

 

 

Forwarding on Busy

Forward on busy: Enter the number the system should forward

calls to when this extension is busy. Select Enable to turn call

Number

forwarding on or Disable to leave it off.

 

 

 

 

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 25 of 71

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsPurpose and Audience About This DocumentManual Conventions Terms used in this manualAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time Settings Checking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetTiming Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsSetting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parametersSIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Web Security Screen Country ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers
Top Page Image Contents