Uniden EXP1240 manual Firmware Update Screen, Firmware Update screen options

Page 59

EXP1240 System Installation Guide

Revision 06

Firmware Update Screen

		Table 21: Firmware Update screen options

	Option	Description

		Start the handset firmware update OR save changes on this screen.
		– If the required version field for a handset type has any value other than 0,
		clicking Save triggers the firmware update process for any handset of
	Save	that handset type which is not at the required version. (Handsets already
	Save	at the required version are not affected.)
		at the required version are not affected.)
		– To save changes to the server address or firmware path, be sure the
		required version field for all handset types is blank or 0 before clicking,
		then click Save.

	Start	Start the firmware update for the base station(s). Updating the firmware will
	Start
	update	reboot the base station(s) and disconnect any calls.

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 59 of 71

Image 59

Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsTerms used in this manual About This DocumentPurpose and Audience Manual ConventionsAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time SettingsChecking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received To delete a server Program the SIP ExtensionsTo edit an existing server Add Extension screen To delete extensions Register Handsets to ExtensionsTo edit an extension Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetSystem Chain ID and RPN IntroductionTiming Levels Sample multi-cell system Sample multi-cell system information Setting Up a Multi-cell SystemSummary Multi-cell system configuration Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsUpdating the Firmware Restoring a ConfigurationSetting Up Firmware Folders Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status parameters Home/Status Screen Read OnlyHome/Status Options Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers parameters Servers ScreenServers options SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parameters SIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Central Directory Screen Country ScreenWeb Security Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers