Uniden EXP1240 manual Contents

Page 2

EXP1240 System Installation Guide	Revision 06
Contents
Introduction	7
Important Safety Instructions!	7
Check the Box Contents	7
About This Document	8
Purpose and Audience	8
Manual Conventions	8
Terms used in this manual	8
Hardware Setup	10
Base Station	10
Connecting the Base Station	10
Wall mounting the base station	12
Handset and Charger	13
Charging the battery	14
Powering on the Handset	14
Initial System Configuration	15
Using the Base Station Interface	16
Configuring General System Settings	17
Change Configuration and Management Settings	18
Change the Default Password	19
Change the PSTN Tones and Emergency Dialing	19
Configure the Network Settings Screen	20
Configure Time Settings	21
Configuring the SIP Server Settings	22
To edit an existing server	24
To delete a server	24
Program the SIP Extensions	24
To edit an extension	26
To delete extensions	26
Register Handsets to Extensions	26
To deregister a handset	28
Multiple Base (Multi-cell) Systems	29
Introduction	29
Timing Levels	29
System Chain ID and RPN	29
Setting Up a Multi-cell System	31

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 2 of 71

Image 2

Contents EXP1240 SIP Dect System Installation Guide Revision 06, July 7Contents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Important Safety Instructions Check the Box ContentsManual Conventions About This DocumentPurpose and Audience Terms used in this manualTerms AbbreviationsHardware Setup Base StationConnecting the base station Base station LEDs and their meaningsBase mounting dimensions Wall mounting the base stationHandset and Charger Handset front viewCharging the battery Powering on the HandsetInitial System Configuration Using the Base Station Interface Summary Basic system configurationConfiguring General System Settings Home/Status screenChange Configuration and Management Settings Management screenChange the Default Password Change the Pstn Tones and Emergency DialingConfigure the Network Settings Screen Country screenConfigure Time Settings Time Settings screenConfiguring the SIP Server Settings Checking time settings updatesSelecting YES indicates If information in rport and received To delete a server Program the SIP ExtensionsTo edit an existing server Add Extension screen To delete extensions Register Handsets to ExtensionsTo edit an extension Extensions screen, no handsets registered To deregister a handset Extensions screen, three handsets registeredSystem Chain ID and RPN IntroductionTiming Levels Sample multi-cell system Sample multi-cell system information Setting Up a Multi-cell SystemSummary Multi-cell system configuration Configuring the Primary Base Station Multi-cellscreen default valuesConfiguring Level 1 Base Stations Home/status screen primary base enabledMulti-cellscreen top after configuration EXP1240 System Installation Guide Configuring Base Stations at Level 2 and Up Base Station Group table, Level 1 complete Multi-cellscreenRemoving Base Stations from a Multi-Cell System Base Station Group table, Level 2 added Multi-cellscreenChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Backing Up Configuration Settings Configuration screenUpdating the Firmware Restoring a ConfigurationSetting Up Firmware Folders Configuring the Firmware Update Settings Firmware path examplesFirmware Update screen Updating Base Station FirmwareUpdating Handsets To verify the firmware update Firmware update progress Extensions screenBase Station Configuration Interface Available ScreensGlobal Buttons and Options Home/Status parameters Home/Status Screen Read OnlyHome/Status Options Extensions Screen Extensions optionsAdd Extension and Edit Extension screens Extensions parameters read onlyParameter Description Extension Servers parameters Servers ScreenServers options SIP server outbound proxy address. Use one of these formats IP Settings parameters Network ScreenVlan Settings parameters Dhcp Options parametersNAT Settings parameters SIP/RTP Settings parametersManagement Settings parameters Management ScreenSetting. The intended audience is Level 1 or 2 technical Firmware Update Screen Firmware Update screen optionsUpdate Handsets parameters Time Settings parameters Time ScreenDST Central Directory Screen Country ScreenWeb Security Screen Multi Cell Screen Importing a new file will replace the existing contact listSettings for this unit parameters 71 for details Base Station Group parameters RPN DectConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers