Uniden EXP1240 manual Vlan Settings parameters, Dhcp Options parameters

Page 55

EXP1240 System Installation Guide

Revision 06

Parameter

Default

Gateway

DNS (Primary and Secondary)

Description

(static IP address only) Enter the IP address of the router that acts as an entrance to the network or provides a default route for communicating with hosts on remote networks.

(static IP address only) Enter the IP addresses of the main (primary) and backup (secondary) servers where this base station should direct Domain Name System (DNS) queries.

 

 

Table 16: VLAN Settings parameters

 

 

 

Parameter

 

Description

 

 

 

 

 

 

Enter the unique identifier (0-4094) for the 802.1Q Virtual LAN that this

 

 

VLAN ID

 

base station belongs to. If this field is null, the base station will not

 

 

recognize VLAN tagging or VLAN discovery through DHCP.

 

 

 

VLAN User

 

Enter the priority level given to packets belonging to the VLAN

 

Priority

 

identified above. Enter a priority level from 0 to 7.

 

 

 

VLAN Settings are not synchronized with other base stations in a multi cell chain. If you change the VLAN Settings, you must change them on each base station.

Table 17: DHCP Options parameters

Parameter

DHCP Option Plug and Play

Description

Select Enable to use SIP server option 120 to obtain the SIP Server’s IP address in the DHCP response. (To enable this feature, Option 120 with the SIP server IP address must be configured on the DHCP server.)

Select Disable to not use SIP server option 120.

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 55 of 71

Image 55
Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsTerms used in this manual About This DocumentPurpose and Audience Manual ConventionsAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time SettingsChecking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetTiming Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsSetting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parametersSIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Web Security Screen Country ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers