Uniden EXP1240 manual Update Handsets parameters

EXP1240 System Installation Guide				Revision 06
		Table 22: Firmware Update Settings parameters
	Parameter		Description
	Firmware update server		Enter the IP address or URL of the server that hosts the
			firmware update files. This server must be available before
	address
			starting an update.
	Firmware path		Enter the path of the firmware update folder (see Table 7 on
			page 42).

	Table 23: Update Handsets parameters
Parameter		Description
		If you have more than one hardware version or handset
Handset Type		model on your system, each detected handset type will be
		displayed here.
		Enter the version of the firmware that will be used to update
Required Version		each type of handset. This field must match the last 3 digits of
		the name of the firmware file.

Firmware file versions are independent for each handset type. Be sure you enter the correct version number for the specific type of handset.

If the required version field for any handset type contains any value other than 0, clicking Save will start the firmware update process for that handset type.

	Table 24: Update Base stations parameters
Parameter		Description
		Enter the version of the firmware that will be used to
Required Version		update the base station. This field must match the last 3
		digits of the name of the firmware file.
Update this base station only		Update the firmware on the currently connected base
		station.

© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 60 of 71