Uniden EXP1240 manual Extensions Screen, Extensions options

Page 49

EXP1240 System Installation Guide

Revision 06

 

 

 

 

 

Item

Definition

 

 

 

 

 

System Type

The signalling protocol used to communicate with the SIP Server.

 

 

 

 

 

RF Band

The DECT radio band currently in use by this base station.

 

 

 

 

 

 

Current Local Time

The current time and date received from the time server.

 

 

 

 

 

Operation Time

The amount of time since this base station was last rebooted.

 

 

 

 

RFPI-Address

The address assigned to the DECT radio of this base station.

 

 

 

 

MAC-Address

The address assigned to the Ethernet connector of this base station.

 

 

 

 

 

IP-Address

The current IP address assigned to this base station.

 

 

 

 

 

 

Firmware Version

The version of the current firmware on this base station.

 

 

 

 

 

Firmware URL

The address of the server this base station uses for firmware updates.

 

 

 

 

 

SIP Identity Status

The status of all handsets registered to this base station, in the format

 

on this Base

 

{Extension}@{SIP Server}.

 

 

station

 

 

 

 

 

 

 

 

Extensions Screen

 

Table 10: Extensions options

 

 

Option

Description

 

 

 

If you have more than one server set up for this system, select the

Server X

server you want to see the extensions for. (If there is only one

 

server configured, clicking the server title has no effect.)

 

 

Add Extension

Create a new extension on the selected server.

 

 

Refresh

Reload the list of extensions for this server.

 

 

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 49 of 71

Image 49
Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsPurpose and Audience About This DocumentManual Conventions Terms used in this manualAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time SettingsChecking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetTiming Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsSetting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parametersSIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Web Security Screen Country ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers