Uniden EXP1240 manual Register Handsets to Extensions, To edit an extension, To delete extensions

Page 26

EXP1240 System Installation Guide

Revision 06

4)Click Save when you’re finished.

5)Repeat the process for each extension you want to program for this server. To program extensions for a different server, select the new server on the main Extensions screen.

To edit an extension

1)Click on the name of the extension in the list. The parameters for that extension are loaded into the screen.

2)Edit the parameters you want to change, then click Save,

OR click Cancel to leave the extension parameters unchanged.

To delete extensions

3)Click the check box beside the extensions you want to delete.

4)Click Delete Extension(s). When the base station asks you to confirm, click OK, OR click Cancel to leave the extension information in the base station.

When you delete an extension, any handset(s) registered to that extension will be deregistered automatically.

Register Handsets to Extensions

In a multi-cell system, you can register the handsets to extensions from any base station. When a handset is moved into another base station's range, it will automatically update its registration to the new base station after 5 to 7 minutes.

1)On the Extensions screen, click the box beside the extension you want to register. (You can only register one extension at a time.)

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 26 of 71

Image 26
Contents EXP1240 SIP Dect System Installation Guide Revision 06, July 7Contents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Important Safety Instructions Check the Box ContentsManual Conventions About This DocumentPurpose and Audience Terms used in this manualTerms AbbreviationsHardware Setup Base StationConnecting the base station Base station LEDs and their meaningsBase mounting dimensions Wall mounting the base stationHandset and Charger Handset front viewCharging the battery Powering on the HandsetInitial System Configuration Using the Base Station Interface Summary Basic system configurationConfiguring General System Settings Home/Status screenChange Configuration and Management Settings Management screenChange the Default Password Change the Pstn Tones and Emergency DialingConfigure the Network Settings Screen Country screenConfigure Time Settings Time Settings screenConfiguring the SIP Server Settings Checking time settings updates Selecting YES indicates If information in rport and received To delete a server Program the SIP ExtensionsTo edit an existing server Add Extension screen To delete extensions Register Handsets to ExtensionsTo edit an extension Extensions screen, no handsets registered To deregister a handset Extensions screen, three handsets registeredSystem Chain ID and RPN IntroductionTiming Levels Sample multi-cell system Sample multi-cell system information Setting Up a Multi-cell SystemSummary Multi-cell system configuration Configuring the Primary Base Station Multi-cellscreen default valuesConfiguring Level 1 Base Stations Home/status screen primary base enabledMulti-cellscreen top after configuration EXP1240 System Installation Guide Configuring Base Stations at Level 2 and Up Base Station Group table, Level 1 complete Multi-cellscreenRemoving Base Stations from a Multi-Cell System Base Station Group table, Level 2 added Multi-cellscreenChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Backing Up Configuration Settings Configuration screenUpdating the Firmware Restoring a ConfigurationSetting Up Firmware Folders Configuring the Firmware Update Settings Firmware path examplesFirmware Update screen Updating Base Station FirmwareUpdating Handsets To verify the firmware update Firmware update progress Extensions screenBase Station Configuration Interface Available ScreensGlobal Buttons and Options Home/Status parameters Home/Status Screen Read OnlyHome/Status Options Extensions Screen Extensions optionsAdd Extension and Edit Extension screens Extensions parameters read onlyParameter Description Extension Servers parameters Servers ScreenServers options SIP server outbound proxy address. Use one of these formats IP Settings parameters Network ScreenVlan Settings parameters Dhcp Options parametersNAT Settings parameters SIP/RTP Settings parametersManagement Settings parameters Management ScreenSetting. The intended audience is Level 1 or 2 technical Firmware Update Screen Firmware Update screen optionsUpdate Handsets parameters Time Settings parameters Time ScreenDST Central Directory Screen Country ScreenWeb Security Screen Multi Cell Screen Importing a new file will replace the existing contact listSettings for this unit parameters 71 for details Base Station Group parameters RPN DectConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers