Uniden EXP1240 manual Base Station Configuration Interface, Available Screens

Page 46

EXP1240 System Installation Guide

Revision 06

Appendix A: Software Reference

Base Station Configuration Interface

•To open the configuration interface, open a web browser window and enter the IP address of the base station you want to configure in the address bar.

•When prompted, enter the user ID and password. The default user ID and password are both admin (all lower case).

•The base station opens the Home/Status screen and displays the values specific to this base station.

Available Screens

You can open any configuration screen by clicking its name on the left side of the screen; the screen name links appear on every screen.

	Screen	Purpose

	Home/Status	Return to the home screen.

	Extensions	Programming extensions and handsets.

	Servers	Provisioning SIP servers.

	Network	Configure how the base station communicates with the network.

	Management	Change the base station name and configure SIP and system logs.

	Firmware Update	Configure remote firmware updates for base stations and handsets.

	Time	Configure the NTP Time server used for synchronization and system
	Time	time stamps.
		time stamps.

	Country	Specify the country or territory where the system is located.

	Web Security	Change the user name and password used to access the base station
	Web Security	web server.
		web server.

	Central Directory	Upload a CSV file containing a central directory list.

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 46 of 71

Image 46

Contents EXP1240 SIP Dect System Installation Guide Revision 06, July 7Contents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Important Safety Instructions Check the Box ContentsManual Conventions About This DocumentPurpose and Audience Terms used in this manualTerms AbbreviationsHardware Setup Base StationConnecting the base station Base station LEDs and their meaningsBase mounting dimensions Wall mounting the base stationHandset and Charger Handset front viewCharging the battery Powering on the HandsetInitial System Configuration Using the Base Station Interface Summary Basic system configurationConfiguring General System Settings Home/Status screenChange Configuration and Management Settings Management screenChange the Default Password Change the Pstn Tones and Emergency DialingConfigure the Network Settings Screen Country screenConfigure Time Settings Time Settings screenConfiguring the SIP Server Settings Checking time settings updatesSelecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered To deregister a handset Extensions screen, three handsets registeredTiming Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Configuring the Primary Base Station Multi-cellscreen default valuesConfiguring Level 1 Base Stations Home/status screen primary base enabledMulti-cellscreen top after configuration EXP1240 System Installation Guide Configuring Base Stations at Level 2 and Up Base Station Group table, Level 1 complete Multi-cellscreenRemoving Base Stations from a Multi-Cell System Base Station Group table, Level 2 added Multi-cellscreenChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Backing Up Configuration Settings Configuration screenSetting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Configuring the Firmware Update Settings Firmware path examplesFirmware Update screen Updating Base Station FirmwareUpdating Handsets To verify the firmware update Firmware update progress Extensions screenBase Station Configuration Interface Available ScreensGlobal Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions Screen Extensions optionsAdd Extension and Edit Extension screens Extensions parameters read onlyParameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats IP Settings parameters Network ScreenVlan Settings parameters Dhcp Options parametersNAT Settings parameters SIP/RTP Settings parametersManagement Settings parameters Management ScreenSetting. The intended audience is Level 1 or 2 technical Firmware Update Screen Firmware Update screen optionsUpdate Handsets parameters Time Settings parameters Time ScreenDST Web Security Screen Country ScreenCentral Directory Screen Multi Cell Screen Importing a new file will replace the existing contact listSettings for this unit parameters 71 for details Base Station Group parameters RPN DectConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers