Uniden EXP1240 manual Management Screen, Management Settings parameters

Page 57

EXP1240 System Installation Guide

Revision 06

Management Screen

		Table 20: Management Settings parameters

	Parameter		Description
	Parameter		Description


	Base Station Name		Enter the name you want this base station to display at the top of
	Base Station Name		the interface screens.
			the interface screens.

			Enter the IP address or URL of the server that hosts the uploaded

	Configuration Server		SIP log files. Base station configuration file(s); base stations will
	Configuration Server		upload log files to the same server.
	Address		upload log files to the same server.
	Address		This server must be available to the base stations when the
			This server must be available to the base stations when the
			Upload of SIP Logs is enabled.

	Management		Select the protocol used for the configuration files and firmware
	Management
	Transfer Protocol		downloads. The default value is TFTP.

	HTTP Management		(for development purpose only)
	HTTP Management
	upload script
	upload script

	HTTP Management		(for development purpose only)
	HTTP Management
	password
	password

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 57 of 71

Image 57

Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsPurpose and Audience About This DocumentManual Conventions Terms used in this manualAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time SettingsChecking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received Program the SIP Extensions To edit an existing serverTo delete a server Add Extension screen Register Handsets to Extensions To edit an extensionTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetIntroduction Timing LevelsSystem Chain ID and RPN Sample multi-cell system Setting Up a Multi-cell System Summary Multi-cell system configurationSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsRestoring a Configuration Setting Up Firmware FoldersUpdating the Firmware Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status Screen Read Only Home/Status OptionsHome/Status parameters Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers Screen Servers optionsServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parametersSIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Country Screen Web Security ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers