Uniden EXP1240 manual Updating Base Station Firmware, Firmware Update screen

Page 43

EXP1240 System Installation Guide				Revision 06

	Handset firmware files

	update.abc.com	/ipdect/firmware	/Pegasus/	PegasusSW_4181_v0019.fwu

	abc.com	/firmware_update	/Pegasus/	PegasusSW_4181_v0007.fwu

	192.168.10.207	/FWupdate	/Pegasus/	PegasusSW_4181_v0107.fwu

6)Click Save when you're finished. This information is saved in the base station so you don't have to re-enter it every time you want to update the firmware.

Updating Base Station Firmware

Updating base station firmware involves an automatic reboot of the base station at the end of the firmware download. This will drop any active calls. It is recommended to perform this update after normal business hours.

Before starting an update, ensure that the TFTP Server is running.

7)Login to the base station configuration interface (see page 16), and go to the Firmware Update screen.

Figure 31: Firmware Update screen

© 2013 Uniden America Corp.

PROPRIETARY AND CONFIDENTIAL

Page 43 of 71

Image 43

Contents Revision 06, July 7 EXP1240 SIP Dect System Installation GuideContents Appendix a Software Reference Table of Figures List of Tables Dect system settings parameters Check the Box Contents Important Safety InstructionsTerms used in this manual About This DocumentPurpose and Audience Manual ConventionsAbbreviations TermsBase Station Hardware SetupBase station LEDs and their meanings Connecting the base stationWall mounting the base station Base mounting dimensionsHandset front view Handset and ChargerPowering on the Handset Charging the batteryInitial System Configuration Summary Basic system configuration Using the Base Station InterfaceHome/Status screen Configuring General System SettingsManagement screen Change Configuration and Management SettingsChange the Pstn Tones and Emergency Dialing Change the Default PasswordCountry screen Configure the Network Settings ScreenTime Settings screen Configure Time SettingsChecking time settings updates Configuring the SIP Server SettingsSelecting YES indicates If information in rport and received To edit an existing server Program the SIP ExtensionsTo delete a server Add Extension screen To edit an extension Register Handsets to ExtensionsTo delete extensions Extensions screen, no handsets registered Extensions screen, three handsets registered To deregister a handsetTiming Levels IntroductionSystem Chain ID and RPN Sample multi-cell system Summary Multi-cell system configuration Setting Up a Multi-cell SystemSample multi-cell system information Multi-cellscreen default values Configuring the Primary Base StationHome/status screen primary base enabled Configuring Level 1 Base StationsMulti-cellscreen top after configuration EXP1240 System Installation Guide Base Station Group table, Level 1 complete Multi-cellscreen Configuring Base Stations at Level 2 and UpBase Station Group table, Level 2 added Multi-cellscreen Removing Base Stations from a Multi-Cell SystemChanging the Primary Base Station in a Chain Multi cell Ready Keep-alive Primary Configuration screen Backing Up Configuration SettingsSetting Up Firmware Folders Restoring a ConfigurationUpdating the Firmware Firmware path examples Configuring the Firmware Update SettingsUpdating Base Station Firmware Firmware Update screenUpdating Handsets Firmware update progress Extensions screen To verify the firmware updateAvailable Screens Base Station Configuration InterfaceGlobal Buttons and Options Home/Status Options Home/Status Screen Read OnlyHome/Status parameters Extensions options Extensions ScreenExtensions parameters read only Add Extension and Edit Extension screensParameter Description Extension Servers options Servers ScreenServers parameters SIP server outbound proxy address. Use one of these formats Network Screen IP Settings parametersDhcp Options parameters Vlan Settings parametersSIP/RTP Settings parameters NAT Settings parametersManagement Screen Management Settings parametersSetting. The intended audience is Level 1 or 2 technical Firmware Update screen options Firmware Update ScreenUpdate Handsets parameters Time Screen Time Settings parametersDST Web Security Screen Country ScreenCentral Directory Screen Importing a new file will replace the existing contact list Multi Cell ScreenSettings for this unit parameters 71 for details RPN Dect Base Station Group parametersConfiguration Screen read only Syslog Screen read only SIP Log Screen read only Appendix B Rfpi Numbers