Ericsson LZT-1872R1A manual Error Messages, Keypad Lock

Page 25

ERROR MESSAGES

SYN LOC, if at anytime the Synthesizer is unable to load and lock on the channel property, a SYN LOC message will be displayed. If the SYN LOC message is displayed on all systems, the radio has failed or has not been programmed properly. The radio’s buttons and keys will still operate with a SYN LOC message displayed.

PRS ERR, message indicates the personality has not been programmed into the radio.

KEYPAD LOCK

The keypad can be locked at any time to prevent undesired key presses. To lock the keypad when it is in Hthe unlocked state, press and release the LOCK (shifted

) key. All buttons and keys except the PTT, , SHIFT/CLR/MONITOR and LOCK (shifted H) will now be inhibited. If the Emergency function of the0 key is disabled, the 0key will also be inhibited. If the key is programmed for Emergency or Emergency/ Home, then the key is not inhibited and an emergency can still be declared on the Home System/Group or the current System/Group (however programmed). To unlock the keypad when it is in the locked state, press and release the LOCK (Shifted H) key.

25

Image 25

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations FCC Licensing Transceiver ServicePage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute SYS and GRP/CHANNEL Indicators IndicatorsBusy Status IndicatorsStandard Tones Alert TonesTones for Trunked Operation only Edacs Page Keypad Lock Error MessagesScat Operation Keypad MuteEdacs Operation Receiving a Message Page Sending a Message Squelch AdjustmentSending a Special Call Press and hold the SHIFT/CLR/MONITOR buttonPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial ADD/DELETE Groups Scan Operation ENABLE/DISABLE ScanWide Area and Priority System Scanning Optional Delete GroupsDynamic Regrouping Optional Prosound OptionalEmergency Operation Optional HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Select GE-MARC Operation Receiving a MessageSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Manually Entered Interconnect Call Scan Operation Enable/Disable ScanScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers