Ericsson LZT-1872R1A manual Manually from the key pad, press thenumberkey

Page 54

2. Enter the telephone number to be called. The last

manually from the key pad, press thenumberkey.

digit entered will always be displayed in the far right

hand side of the display. Any p eviously entered

digits will scroll left. Only seven digits will be visible at

a time with the leading digit scrolling off the display

upon each new key entry. To backspace and clear a

digit, press the skey.

 

NOTE

 

To recall the last interconnect

entered

3.Complete the telephone entry by pressing the * key. The *key indicates the digits are for an inter-connect call. This will not be displayed but a tone will sound.

4.Press and release the PTT bar to initiate the call. The radio displays WAIT and performs the necessary signalling required to obtain a working channel. When the signalling is successfully completed the BUSY flag lights and the proper DTMF tones will be sent and heard at the speaker.

The radio is out of range or the radio is inoperative when the signalling is unsuccessful, the NO SRVC indicator is illuminated and a sequence of five beeps are heard at the speaker. Any subsequent attempt to initiate a call within the next 20 seconds will be ignored. The radio can be cleared from this mode by double clicking the SHIFT/CLR/MONITOR button.

54

Image 54
Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers