Ericsson LZT-1872R1A manual Sending a Manually Entered Interconnect Call

Page 33

NOTE

To recall the last individual number entered manually from the key pad, press the Hkey.

3.Press and hold the PTT bar to initiate the call. The radio performs the necessary signaling required to obtain a working channel.

4.When the signaling is successfully completed the BUSY flag turns on and the Call originate tone sounds. Speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply. Messages cannot be received when the PTT bar is pressed. If the signaling is unsuccessful, the radio will remain in the Special Call Mode and sound the appropriate alert tone(s).

5.When the call in complete, double click the SHIFT/CLR/MONITOR button to exit the Special Call mode and return to the normal System/Group display.

SENDING A MANUALLY ENTERED INTERCONNECT CALL

1.Press the 5key to put the radio into Special Call mode. The radio displays the last accessed call number from the pre-programmed Special Call

33

Image 33

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations FCC Licensing Transceiver ServicePage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute SYS and GRP/CHANNEL Indicators IndicatorsBusy Status IndicatorsStandard Tones Alert TonesTones for Trunked Operation only Edacs Page Keypad Lock Error MessagesScat Operation Keypad MuteEdacs Operation Receiving a Message Page Sending a Message Squelch AdjustmentSending a Special Call Press and hold the SHIFT/CLR/MONITOR buttonPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial ADD/DELETE Groups Scan Operation ENABLE/DISABLE ScanWide Area and Priority System Scanning Optional Delete GroupsDynamic Regrouping Optional Prosound OptionalEmergency Operation Optional HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Select GE-MARC Operation Receiving a MessageSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Manually Entered Interconnect Call Scan Operation Enable/Disable ScanScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers