Ericsson LZT-1872R1A manual Quick Reference Guide Controls

Page 16

QUICK REFERENCE GUIDE
CONTROLS
On/Off	The top, right clockwise rotation
Volume	applies power with a mechanical
	click sound, and a full counter
	clockwise	rotation,	removes	power
	with a click sound. A clockwise
	rotation makes the volume level
	increase and a counter clockwise
	rotation decreases the volume level.
	The radio can be programmed to
	beep once after power is applied,
	indicating it is ready for use.
PTT Button	Pressing the PTT button (located on
	the side of the radio) will key the
	radio’s transmitter and perform the
	necessary steps to acquire a
	communication channel.
Shift/Clear/	All alternate key functions are
Monitor	accessed	by	pressing	the
	Shift/Clear/Monitor		button and then
	pressing the desired function key.

Trunked - Pressing the Shift/Clear/ Monitor button twice (double click) will invoke the CLEAR function which is used to exit the Special Call mode and return to the normal System/ Group display.

16

Image 16

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers