Ericsson LZT-1872R1A manual Scan Operation

Page 70

4.Release the PTT bar and listen for a dial tone. When the dial tone is received, press and hold the PTT bar and enter the desired telephone number. As you enter each digit, the DTMF sidetone will be heard in the speaker as the radio transmits the DTMF tone.

5.After all the digits have been keyed in, release the PTT bar.

6.When someone answers, press the PTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking. Messages cannot be received when the PTT bar is pressed.

7.At the completion of the call, press and hold the PTT bar and then enter the *or #key as the telephone interconnect system requires. Release the PTT bar.

SCAN OPERATION

Enable/Disable SCAN

sTo enable Channel scanning, press and release the key. The SCAN flag will illuminate to indicate can is active. When scan is on, press and release the s

key to disable scan operation. The SCAN flag will be extinguished when scan is turned off.

Add/Delete Channels

Channels can be added or deleted from the scan list as necessary. To add channels to the scan list:

70

Image 70

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers