Ericsson LZT-1872R1A manual Mute

Page 18

EDACS systems.

SPressing the SPC (Special) key will put the radio in the Special Call mode. From the Special Call mode the radio is able to make individual and interconnect calls. The key is active with trunked systems only.

sThe SCAN-Add/Delete key is used to enable the Scan mode and to add or delete Groups/Channels to the scan list. It is also used as a backspace key in trunked systems only.

TThe STORE key is used to store individual call numbers and inter- connect calls. This key is active with trunked systems only.

MUTE	The MUTE key in conjunction with
	the S IFT/CLR/MONITOR button is
	used to mute/unmute the radio.
LOCK	The LOCK key in combination with
	the S IFT/CLR/MONITOR button is
	used to lock the keypad. All buttons
	and keys will be locked except the
	PTT, 0, SHIFT/CLR/MONITOR,
	and the LOCK.

rThe H(Recall) key can be used to recall manually entered individual and interconnect calls in the EDACS and GE-MARC systems.

18

Image 18

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers